March Nano Pump, Stainless Steel Head
Designed for the small 'Nano' commercial brewery. ¬† The March Nano Brewery Pump ‚ÄìStainless features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps. Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump.
*Please Note* - This pump must be taken apart and cleaned after every use to prevent the impeller from seizing. To do so, take the bolts out of the pump head, remove the pump head from the pump, then take the impeller shaft and actual impeller apart. Clean well, and reassemble.
Please note that the pump comes with a three foot cord WITHOUT a plug attached.
Statistics:¬†Motor: 1/8HP 115v/60Hz
Max Flow: 17 G.P.M at zero head
Max Head: 27 ft. at 1 GPM
Inlet: 1" FPT
Outlet: 1/2" MPT
Pressure: Max. internal pressure is 200 psi
Temperature Range: 250F or 121.1C
Electrical: 115V 50/60HZ
Materials in Contact with Beer:
Stainless Steel (Front and Rear Housing)
Buna N (O-Ring)
Ceramic (Thrust Washers)
Max. liquid temperature is 250F degrees
Max. internal pressure is 200 psi
Available by pre-order only.
We Also Recommend